Skip to Content

saratim

EVOLUTION CUTTING BLADES FOR SAWS – DIAMOND BLADE

EVOLUTION CUTTING BLADES FOR SAWS – DIAMOND BLADE

Submitted by • November 6, 2020

bit.ly - Cutting Blades For Saws Rated For Brick, Concrete and Other Applications Evolution Industrial Cold Cut Cutting Blades utilize premium features to be better than your average saw blade. These cold cut blades have a robust and durable design, cutting without producing ...

Acoustical Wedge Anchor Bolts

Acoustical Wedge Anchor Bolts

Submitted by • November 4, 2020

www.albanycountyfasteners.com - Masonry Acoustical Wedge Anchors are used to anchor and secure suspended wire to solid orMasonry Acoustical Wedge Anchors are used to anchor and secure suspended wire to solid or hollow concrete, brick, and block masonry surfaces including concrete ceilings. Acoustical Wedge ...

3/8″ ZINC PLATED PHILLIPS / FLAT HEAD SLEEVE ANCHORS

3/8″ ZINC PLATED PHILLIPS / FLAT HEAD SLEEVE ANCHORS

Submitted by • November 3, 2020

www.albanycountyfasteners.com - Phillips/Slotted head combo Require a pilot hole Head is tightened to expand the outer sleeve Zinc plating adds a layer of corrosion resistance to plain alloy steel Not as corrosion resistant as Hot Dipped Galvanized coating Shop 3/8" Zinc Plated Phillips / Flat Head Sleeve ...

PLASTIC TOGGLE ANCHORS

PLASTIC TOGGLE ANCHORS

Submitted by • November 2, 2020

www.albanycountyfasteners.com - PLASTIC TOGGLE ANCHORS Expansion Anchors Commonly Used in Wall Board & Cinder Block Can be used on drywall, sheet rock, gypsum board or cinder block Single piece, plastic design Used with a sheet metal screw to anchor behind wallboard FF-S-325 Group V, Type 2, Class ...

1/4″-20 ZINC PLATED TOGGLE WING ANCHORS

1/4″-20 ZINC PLATED TOGGLE WING ANCHORS

Submitted by • October 28, 2020

www.albanycountyfasteners.com - Allowable Load Tolerances Wallboard 3/8": 55lbs Tension and Shear Wallboard 1/2": 60lbs Tension and Shear Wallboard 5/8": 65lbs Tension and Shear Wallboard 3/4": 80lbs Tension, 75lbs Shear Hollow Concrete Masonry: 70lbs Tension, 120lbs Shear A Toggle spring wing anchor, also called a toggle nut, in zinc ...

KapToggle Hollow Wall Anchor

KapToggle Hollow Wall Anchor

Submitted by • October 27, 2020

www.albanycountyfasteners.com - Can be used on drywall, sheet rock, gypsum board or masonry block Installs in seconds 3 times stronger than standard wall fasteners 3 Piece Design: Metal Toggle, Serrated Nylon Strap, and Shoulder Washer Washer slides down strap and fits snug to the predrilled hole ...

Concrete Drop In Anchors

Concrete Drop In Anchors

Submitted by • October 21, 2020

www.albanycountyfasteners.com - Concrete drop-in anchors are medium-duty anchors that are internally threaded. These kinds of female anchors are comprised of an internally threaded shell with an expansion cone insert. They are used in high strength applications by fastening a bolt into the ...

Zinc Plated Lag Shield Expansion Anchors

Zinc Plated Lag Shield Expansion Anchors

Submitted by • October 20, 2020

www.albanycountyfasteners.com - Consist of pre-assembled two-part expansion shields Expand as lag screw is fastened through the anchor Possess very precise tapered internal threading to permit easy turning of the lag screw Come in short or long length variants Zinc plated to add a layer of corrosion ...

Machine Screw Anchors

Machine Screw Anchors

Submitted by • October 19, 2020

qr.ae - Machine Screw Anchors are used to expand the anchor in the base of any material. After installing an anchor the bolt can be threaded and unthreaded as desired. These screws come in handy as they allow you to hang things ...

316 Stainless Steel Lag Bolts

316 Stainless Steel Lag Bolts

Submitted by • October 16, 2020

www.albanycountyfasteners.com - Lag Screws are typically used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices. 1/2" | 316 Stainless steel lag bolts are extremely corrosion resistant. They feature a Hex Head and ...